OEM Mitsubishi Exterior Door Panels and Frames
No results found. Here are some helpful search tips:
- Search by a part name. Example: water pump.
- Be less specific. Example: brake instead of ceramic brake.
- Remove information such as make, year or model.
- Can't find the part you are looking for? Contact us and we'll find it for you!
More Than a Panel: What Your Door Does
A Mitsubishi door carries the glass and regulator, mounts the handle and lock, and contains reinforcement designed to protect occupants in a side impact. A small dent may be repairable, but a door that won't close flush, has rust through the bottom seam, or took a hard hit usually needs replacement metal.
Door Panels and Frame Parts Available
- Door shells, the complete bare door structure for major damage
- Outer door skins for replacing the exterior sheet metal only
- Door sashes and window frames that guide the glass and hold the seal
- Door frame trim and garnish for the pillar and sash areas
- Check straps and reinforcements that control door swing
Why Factory Doors Close and Seal Right
Door gaps, hinge mounting points, and seal surfaces all have to match the body opening within tight tolerances. If any of them are off, you get wind noise, water leaks, or a door that needs to be slammed. Genuine Mitsubishi door panels and frames are made to the original specifications, including the internal reinforcements. Hence, the door lines up with your fenders and quarter panel and works with your existing hinges and latch.
Choosing Between a Shell and a Skin
Door shell
A shell replaces the entire door structure. It's the right choice when the inner frame is bent or rusted, and it's often faster for a body shop to install.
Outer skin
A skin replaces only the outside panel and is crimped onto the existing frame. It can cost less but requires body shop skill to hem and seal correctly.
Plan for transfers and paint
Most replacement doors arrive in primer. You'll also transfer the glass, regulator, window motor, and interior door panel, so replace any that are worn.
Matching the Door to Your Body Style
Doors differ by model, generation, body style, and position. For example, Mirage hatchback and Mirage G4 sedan rear doors aren't interchangeable, and the same goes for Lancer sedan and Sportback rear doors. Confirm front or rear, left or right (left is the driver's side on U.S. vehicles), and your VIN before ordering. Replace tired weather stripping while the door is apart, and check whether you need new exterior door handles, locks and hardware, or moldings and trim to finish the repair.
Door Repair Takeaways
- Genuine doors preserve factory alignment, sealing, and side-impact structure.
- Choose a shell for frame damage and a skin for outer-panel damage only.
- Expect to paint the door and transfer glass, regulator, and trim.
- Confirm body style, position, and VIN before ordering.
Mitsubishi Door Panel Questions Owners Ask
Do replacement Mitsubishi doors come with glass and hardware?
Typically, no. Door shells are bare structures, so glass, regulators, handles, and trim transfer from the old door or are ordered separately.
Why does my door leak water after a repair?
Misalignment or compressed weather stripping is the usual cause.
Is a door skin or a door shell better?
It depends on the damage. A skin works when the inner frame is straight; a shell is better for structural or rust damage.